High Hardness Series
Solid carbide end mills engineered specifically for hardened steels from 45 HRC up to 55 HRC. TiSiNoS Pro coating delivers extreme wear resistance and thermal stability. Short and long series available.
SIM03 · End Mill
4-Flute
Square.
Solid carbide 4-flute square end mills, helix 30°. Bright and Ti(A)LN coated. Standard workhorse for general milling in steel, stainless steel, cast iron and hardened materials.
Ø3–20mm
4 Flute
Helix 30°
Square End
ISO P · H · K
MOQ 10pcs (3–8mm) / 5pcs (8mm+)
Available Variants
Applications
Side milling, slotting, profiling, shoulder milling. Carbon steel, alloy steel, tool steel, stainless, cast iron. Suitable for wet, MQL and dry machining with coated variant.
| Item Code (Bright) | Item Code (Ti(A)LN) | DIA mm | SD mm | FL mm | OAL mm |
|---|---|---|---|---|---|
| SIM03M3.00 | SIM03M3.00TLC | 3 | 3 | 12 | 38 |
| SIM03M4.00 | SIM03M4.00TLC | 4 | 4 | 14 | 50 |
| SIM03M5.00 | SIM03M5.00TLC | 5 | 5 | 16 | 50 |
| SIM03M6.00 | SIM03M6.00TLC | 6 | 6 | 19 | 56 |
| SIM03M8.00 | SIM03M8.00TLC | 8 | 8 | 20 | 63 |
| SIM03M10.00 | SIM03M10.00TLC | 10 | 10 | 22 | 70 |
| SIM03M12.00 | SIM03M12.00TLC | 12 | 12 | 25 | 75 |
| SIM03M14.00 | SIM03M14.00TLC | 14 | 14 | 30 | 89 |
| SIM03M16.00 | SIM03M16.00TLC | 16 | 16 | 32 | 89 |
| SIM03M18.00 | SIM03M18.00TLC | 18 | 18 | 35 | 100 |
| SIM03M20.00 | SIM03M20.00TLC | 20 | 20 | 38 | 100 |
All prices in INR, ex-GST. Valid 30 days from date of quote. DIA = Diameter · SD = Shank Diameter · FL = Flute Length · OAL = Overall Length
SIM04 · End Mill
2-Flute
Ball Nose.
Solid carbide 2-flute ball nose end mills, helix 30°. Bright and Ti(A)LN coated. Ideal for 3D profiling, contour milling, ramp milling and finishing passes in aluminium and non-ferrous materials.
Ø3–20mm
2 Flute
Helix 30°
Ball Nose
ISO P · M · N
MOQ 10pcs (3–8mm) / 5pcs (8mm+)
Available Variants
Applications
3D contouring, die & mould profiling, fillet milling, ramp entry, surface finishing. Two-flute design allows better chip evacuation in softer materials. Suitable for aluminium, copper, brass and composites.
| Item Code (Bright) | Item Code (Ti(A)LN) | DIA mm | SD mm | FL mm | OAL mm |
|---|---|---|---|---|---|
| SIM04M3.00 | SIM04M3.00TLC | 3 | 3 | 12 | 38 |
| SIM04M4.00 | SIM04M4.00TLC | 4 | 4 | 14 | 50 |
| SIM04M5.00 | SIM04M5.00TLC | 5 | 5 | 16 | 50 |
| SIM04M6.00 | SIM04M6.00TLC | 6 | 6 | 19 | 56 |
| SIM04M8.00 | SIM04M8.00TLC | 8 | 8 | 20 | 63 |
| SIM04M10.00 | SIM04M10.00TLC | 10 | 10 | 22 | 70 |
| SIM04M12.00 | SIM04M12.00TLC | 12 | 12 | 25 | 75 |
| SIM04M14.00 | SIM04M14.00TLC | 14 | 14 | 30 | 89 |
| SIM04M16.00 | SIM04M16.00TLC | 16 | 16 | 32 | 89 |
| SIM04M18.00 | SIM04M18.00TLC | 18 | 18 | 35 | 100 |
| SIM04M20.00 | SIM04M20.00TLC | 20 | 20 | 38 | 100 |
All prices in INR, ex-GST. Valid 30 days from date of quote.
SIM05 · End Mill
4-Flute
Ball Nose.
Solid carbide 4-flute ball nose end mills, helix 30°. Bright and Ti(A)LN coated. For 3D profiling, die & mould machining, and finishing in steel and stainless steel. Four flutes give improved surface finish over 2-flute designs.
Ø3–20mm
4 Flute
Helix 30°
Ball Nose
ISO P · M · K
MOQ 10pcs (3–8mm) / 5pcs (8mm+)
Available Variants
Applications
Die & mould 3D profiling, semi-finish and finish passes in steel and stainless. Better surface finish than 2-flute. Used in injection mould tooling, forging dies and precision component machining.
| Item Code (Bright) | Item Code (Ti(A)LN) | DIA mm | SD mm | FL mm | OAL mm |
|---|---|---|---|---|---|
| SIM05M3.00 | SIM05M3.00TLC | 3 | 3 | 12 | 38 |
| SIM05M4.00 | SIM05M4.00TLC | 4 | 4 | 14 | 50 |
| SIM05M5.00 | SIM05M5.00TLC | 5 | 5 | 16 | 50 |
| SIM05M6.00 | SIM05M6.00TLC | 6 | 6 | 19 | 56 |
| SIM05M8.00 | SIM05M8.00TLC | 8 | 8 | 20 | 63 |
| SIM05M10.00 | SIM05M10.00TLC | 10 | 10 | 22 | 70 |
| SIM05M12.00 | SIM05M12.00TLC | 12 | 12 | 25 | 75 |
| SIM05M14.00 | SIM05M14.00TLC | 14 | 14 | 30 | 89 |
| SIM05M16.00 | SIM05M16.00TLC | 16 | 16 | 32 | 89 |
| SIM05M18.00 | SIM05M18.00TLC | 18 | 18 | 35 | 100 |
| SIM05M20.00 | SIM05M20.00TLC | 20 | 20 | 38 | 100 |
All prices in INR, ex-GST. Valid 30 days from date of quote.
SIM06 · End Mill
3-Flute
Square.
Reinforced 3-flute end mills for high feed milling. Solid carbide, bright and Ti(A)LN coated. The 3-flute geometry balances chip clearance and rigidity — well suited for high metal removal rates in steel and aluminium alloys.
Ø3–20mm
3 Flute
Square End
High Feed
ISO P · N · M
MOQ 10pcs (3–8mm) / 5pcs (8mm+)
Available Variants
Applications
High feed milling, slotting in aluminium alloys, steel roughing and semi-finishing. Three-flute design is preferred where chip load per tooth must be maximised while maintaining chip evacuation.
| Item Code (Bright) | Item Code (Ti(A)LN) | DIA mm | SD mm | LOC mm | OAL mm |
|---|---|---|---|---|---|
| SIM06M3.00 | SIM06M3.00TLC | 3 | 6 | 8 | 50 |
| SIM06M4.00 | SIM06M4.00TLC | 4 | 6 | 11 | 50 |
| SIM06M6.00 | SIM06M6.00TLC | 6 | 6 | 13 | 50 |
| SIM06M8.00 | SIM06M8.00TLC | 8 | 8 | 19 | 70 |
| SIM06M10.00 | SIM06M10.00TLC | 10 | 10 | 22 | 72 |
| SIM06M12.00 | SIM06M12.00TLC | 12 | 12 | 25 | 75 |
| SIM06M16.00 | SIM06M16.00TLC | 16 | 16 | 32 | 92 |
| SIM06M20.00 | SIM06M20.00TLC | 20 | 20 | 38 | 100 |
All prices in INR, ex-GST. Valid 30 days. LOC = Length of Cut
SIM03 Long · End Mill
Long Series
End Mills.
Standard long-series 4-flute square end mills. Ø3–20mm. Extended flute length and overall length for machining deeper cavities, pockets, and features where standard series reach is insufficient.
Ø3–20mm
4 Flute
Square End
Long Series
Deep Cavity
MOQ 10pcs (3–8mm) / 5pcs (8mm+)
Available Variants
Applications
Deep pocket milling, cavity machining, frame milling. Applications where standard series end mills cannot reach the required depth. Used extensively in jig & fixture and mould base machining.
| Item Code (Bright) | Item Code (Ti(A)LN) | DIA mm | SD mm | LOC mm | OAL mm |
|---|---|---|---|---|---|
| SIM03M3.00 | SIM03M3.00TLC | 3 | 6 | 6 | 38 |
| SIM03M4.00 | SIM03M4.00TLC | 4 | 6 | 8 | 50 |
| SIM03M5.00 | SIM03M5.00TLC | 5 | 6 | 11 | 50 |
| SIM03M6.00 | SIM03M6.00TLC | 6 | 6 | 13 | 50 |
| SIM03M8.00 | SIM03M8.00TLC | 8 | 8 | 13 | 50 |
| SIM03M10.00 | SIM03M10.00TLC | 10 | 10 | 14 | 50 |
| SIM03M12.00 | SIM03M12.00TLC | 12 | 12 | 16 | 64 |
| SIM03M16.00 | SIM03M16.00TLC | 16 | 16 | 20 | 75 |
| SIM03M20.00 | SIM03M20.00TLC | 20 | 25 | 25 | 75 |
All prices in INR, ex-GST. Valid 30 days. LOC = Length of Cut
SIM14 · End Mill
Extra Long
Reach.
Extra-long-series end mills for deep cavities and reach-limited features. Available in two OAL variants per diameter — 100mm and 150mm overall length. For machining where even long series reach is insufficient.
Ø3–12mm
OAL 100 & 150mm
Deep Cavity
Reach Limited
MOQ 10pcs (3–8mm) / 5pcs (8mm+)
Available Variants
Applications
Deep cavity and core machining in injection moulds, deep pocket milling in die casting tools, reach-limited features in aerospace structural parts. Two OAL options per diameter give flexibility.
| Item Code (Bright) | Item Code (Ti(A)LN) | DIA mm | SD mm | LOC mm | OAL mm |
|---|---|---|---|---|---|
| SIM14M3.00 | SIM14M3.00TLC | 3 | 3 | 40 | 100 |
| SIM14M4.00 | SIM14M4.00TLC | 4 | 4 | 40 | 100 |
| SIM14M5.00 | SIM14M5.00TLC | 5 | 5 | 40 | 100 |
| SIM14M6.00 | SIM14M6.00TLC | 6 | 6 | 40 | 100 |
| SIM14M8.00 | SIM14M8.00TLC | 8 | 8 | 50 | 100 |
| SIM14M8.00 | SIM14M8.00TLC | 8 | 8 | 75 | 150 |
| SIM14M10.00 | SIM14M10.00TLC | 10 | 10 | 40 | 100 |
| SIM14M10.00 | SIM14M10.00TLC | 10 | 10 | 75 | 150 |
| SIM14M12.00 | SIM14M12.00TLC | 12 | 12 | 75 | 150 |
All prices in INR, ex-GST. Valid 30 days. Two OAL options available per diameter for Ø8 and Ø10mm.
Related Products.
For special requirements, talk to us.
We work with customers to deliver special, customised solid carbide tools to drawing. Reach out to our technical sales desk — we deliver to drawing.
Reviews
There are no reviews yet.